With the use of several patented technologies, we efficiently solved the common problem that the near-field cutting speed is obviously slower than the far-field cutting speed or there is a the big difference between the cutting speed in near-field and far-field, in the application of CO2 laser tubes on flat beds.
Features and Advantages：
A.The application of the special reducer tube body design and the mounting solved the problem of cavity change, which makes the light spot and the laser beam better and more stable.
B.With the application of several patented technologies, there won’t be sympathetic vibration when the laser tube moves with the flat bed crossbeam, which makes the laser beam quality and output power more stable.
C.The consistency of light spot mode in near-field and far-field is better. The light spot is smaller and the output power is higher.
D.With the application of unique patented technologies, it makes sure that the laser tubes have long working life when used under high working current28mA.
E.The special appearance designs make our tubes highly recognizable in the industry; With a very low failure rate, we can provide customers with high-quality products and after-sales service.
|Model||Length(mm)||Outer Diameter（mm）||Rated Power(w)||Max Power(w)||Warranty(month)||Instability（%）||Remarks|
|C6||1650±30||80/60||130||155||12||≤±5||With 150W power supply|
|C7||1780±30||80/60||140||170||12||≤±5||With 150W power supply|
|C8||1850±30||80/60||150||180||12||≤±5||With 150W power supply|
|C9||1880±30||100/80/60||160||180||12||≤±5||With 200W power supply|
|C20||2080±30||100/80/60||180||200||12||≤±5||With 200W power supply|
1.We can customize products with special specifications according to customers' requirements.
2.The tube diameter tolerance of all products is ±2mm.
3.The long-life use current should be controlled at 28mA, and the maximum working current should not exceed 30mA.
4.Our company reserves the right to change product information without notice.